Greenlee

Greenlee-LANcat/Fluke Style System6 Network Cable Tester W/Case Manuals and Software

Out of stock

Network Cable Testor

Per the Manufacturer: LANcat is the only network cable certification system with a modular design that allows you to select the test capability that meets your needs today, and to economically upgrade performance later to meet future requirements. Plug-in Performance Modules, a Datacom patented feature, provides flexibility to change the system to stay current with new standards. The LANcat System 6 configuration, equipped with C5e Performance Modules, is the latest advancement in cable certification technology. With C5e Performance Modules, the System 6 adds the advanced measurements of Equal Level Far End Crosstalk (ELFEXT), Power Sum ELFEXT, and Return Loss for certification of Enhanced Category 5 links (Cat 5e) to 100 MHz. In addition, measurements of Power Sum NEXT, Attenuation, and Power Sum ACR, plus Propagation Delay and Skew are also measured - all critical for verified support of very high data rate networks. The extended frequency testing provides a measure of usable link bandwidth by determining the PS-ACR zero point. LANcat System 6 is fully Category 5/Class D compliant per TIA/EIA TSB-67 and ISO/IEC cable requirements, and also provides measures of CAT 5 headroom margin. LANcat System Features LANcat System 6 includes all the features and conveniences that are LANcat trademarks, including: ❖ Simple to Learn and Use Cable certification has never been easier. Simply turn the dial to AUTOTEST and in 20 seconds observe the results. No confusing keypads or multi-layer menus to slow you down. Summary and detailed test results and graphs are clearly displayed. The brightly backlit LCD display is particularly useful in areas of low ambient light. The built-in Cable Toner facilitates location of cable ends with a common inductive amplifier/probe. Store up to 400 AUTOTESTS in each handset (800 total) for later recall or upload to PC. ❖ Test and Talk With One Instrument LinkTalk TM provides voice communications over the cable under test, automatically finding usable wires, even if the cable is miswired. LinkTalk includes builtin microphones, individual earphones, volume controls, and Call Alert signal. Miniature audio jacks on the Handsets accept any conventional headset. LinkTalk keeps you talking even in buildings that prevent use of 2-way radio

 

❖ Dual Instrument Displays DualViewTM instrument displays provide full graphic displays at both main and remote units. An excellent aid for troubleshooting cable problems. ❖ High Confidence Testing Plug-in Performance Modules provide an optimized interface to the cable under test and minimize measurement errors. Performance Modules allow easy connection to 110 Blocks, BIX Blocks, ALL-LAN (Mini-C) jacks, coax, and fiber-optic cable. Testers can be calibrated in the field for maximum accuracy, and provide Pair Reversal and Repeatability functions to verify unit performance. ❖ Test Fiber Each LANcat Handset can be converted to a precision, optical power meter with the optional FIBERcatTM Performance Module. FIBERcat is capable of measuring optical loss for both multimode and singlemode fiber. FIBERcat measures 850 nm, 1300 / 1310 nm, and 1550 nm wavelengths with 0.1 dB resolution and provides result storage. ❖ Better Power Options LANcat Handsets offer the convenience of operation from either common alkaline AA cells, AC/mains adapter, or an optional, rechargeable Nickel Metal Hydride (NiMH) battery pack. ❖ Report Manager Software Datacom's Report Manager Software (RMS) allows quick and easy uploading of test reports. RMS automatically establishes a serial link with the PC and provides a simple, intuitive interface for summarizing, sorting and printing test reports. RMS is fully Windows95/NT compatible. ❖ More for Your Money Every LANcat test system is backed with an industry-leading 2 year warranty, free firmware upgrades, free Report Manager Software, and unlimited professional technical support. ❖ LANcat System 6 Contents LANcat Handsets (2), C5e Modular Plug Performance Modules (2), Protective Handset cases (2), LinkTalk earphones (2), PC interface cable, Report Manager software, Calibration Standard, Calibration Coupler, AA alkaline batteries (16), AC/mains adapters (2), hard plastic carrying case with locks, and User’s Manual. ❖ Power (each Handset) Standard: 12 hours operation (>800 Autotests) from 8 AA alkaline batteries Optional: Removable, rechargeable NiMH battery pack ❖ Size (each Handset): 9.6 x 3.9 x 2.5 in. (31 x 9.9 x 6.3 cm) ❖ Weight (each Handset): 1 lb. 15 oz. (0.88 kg)

Fine Used Working Condition Please View our High Quality Images for a  More Detailed Condition Description.

$722.34
Add to wishlist

Per the Manufacturer: LANcat is the only network cable certification system with a modular design that allows you to select the test capability that meets your needs today, and to economically upgrade performance later to meet future requirements. Plug-in Performance Modules, a Datacom patented feature, provides flexibility to change the system to stay current with new standards. The LANcat System 6 configuration, equipped with C5e Performance Modules, is the latest advancement in cable certification technology. With C5e Performance Modules, the System 6 adds the advanced measurements of Equal Level Far End Crosstalk (ELFEXT), Power Sum ELFEXT, and Return Loss for certification of Enhanced Category 5 links (Cat 5e) to 100 MHz. In addition, measurements of Power Sum NEXT, Attenuation, and Power Sum ACR, plus Propagation Delay and Skew are also measured - all critical for verified support of very high data rate networks. The extended frequency testing provides a measure of usable link bandwidth by determining the PS-ACR zero point. LANcat System 6 is fully Category 5/Class D compliant per TIA/EIA TSB-67 and ISO/IEC cable requirements, and also provides measures of CAT 5 headroom margin. LANcat System Features LANcat System 6 includes all the features and conveniences that are LANcat trademarks, including: ❖ Simple to Learn and Use Cable certification has never been easier. Simply turn the dial to AUTOTEST and in 20 seconds observe the results. No confusing keypads or multi-layer menus to slow you down. Summary and detailed test results and graphs are clearly displayed. The brightly backlit LCD display is particularly useful in areas of low ambient light. The built-in Cable Toner facilitates location of cable ends with a common inductive amplifier/probe. Store up to 400 AUTOTESTS in each handset (800 total) for later recall or upload to PC. ❖ Test and Talk With One Instrument LinkTalk TM provides voice communications over the cable under test, automatically finding usable wires, even if the cable is miswired. LinkTalk includes builtin microphones, individual earphones, volume controls, and Call Alert signal. Miniature audio jacks on the Handsets accept any conventional headset. LinkTalk keeps you talking even in buildings that prevent use of 2-way radio

 

❖ Dual Instrument Displays DualViewTM instrument displays provide full graphic displays at both main and remote units. An excellent aid for troubleshooting cable problems. ❖ High Confidence Testing Plug-in Performance Modules provide an optimized interface to the cable under test and minimize measurement errors. Performance Modules allow easy connection to 110 Blocks, BIX Blocks, ALL-LAN (Mini-C) jacks, coax, and fiber-optic cable. Testers can be calibrated in the field for maximum accuracy, and provide Pair Reversal and Repeatability functions to verify unit performance. ❖ Test Fiber Each LANcat Handset can be converted to a precision, optical power meter with the optional FIBERcatTM Performance Module. FIBERcat is capable of measuring optical loss for both multimode and singlemode fiber. FIBERcat measures 850 nm, 1300 / 1310 nm, and 1550 nm wavelengths with 0.1 dB resolution and provides result storage. ❖ Better Power Options LANcat Handsets offer the convenience of operation from either common alkaline AA cells, AC/mains adapter, or an optional, rechargeable Nickel Metal Hydride (NiMH) battery pack. ❖ Report Manager Software Datacom's Report Manager Software (RMS) allows quick and easy uploading of test reports. RMS automatically establishes a serial link with the PC and provides a simple, intuitive interface for summarizing, sorting and printing test reports. RMS is fully Windows95/NT compatible. ❖ More for Your Money Every LANcat test system is backed with an industry-leading 2 year warranty, free firmware upgrades, free Report Manager Software, and unlimited professional technical support. ❖ LANcat System 6 Contents LANcat Handsets (2), C5e Modular Plug Performance Modules (2), Protective Handset cases (2), LinkTalk earphones (2), PC interface cable, Report Manager software, Calibration Standard, Calibration Coupler, AA alkaline batteries (16), AC/mains adapters (2), hard plastic carrying case with locks, and User’s Manual. ❖ Power (each Handset) Standard: 12 hours operation (>800 Autotests) from 8 AA alkaline batteries Optional: Removable, rechargeable NiMH battery pack ❖ Size (each Handset): 9.6 x 3.9 x 2.5 in. (31 x 9.9 x 6.3 cm) ❖ Weight (each Handset): 1 lb. 15 oz. (0.88 kg)

Fine Used Working Condition Please View our High Quality Images for a  More Detailed Condition Description.

Recently Viewed Products